Feature:
1. Portable wireless air pump. Digital tire pressure detection, automatic charging and stopping of preset tire pressure.
2. Small size, great use. Suitable for various inflatable purposes:Inflatable Toys, Car tires, Balll, Electric car, bicycle, Swimming ring.
3. Accurate monitoring, automatic display of tire pressure status. Built-in precision chip, automatic detection when connectedTire pressure, normal pressure does not require inflation.
4. One machine for multiple uses. Prepare for emergency use. Complete accessories to meet a variety of gas supplement needs.Unexpected situation easily resolved.
5. Can be used as a power bank,outdoor emergency charging.
Specification:
Brand | Ronda |
Model | M8 |
Product name | wireless air pump |
Power | 80W |
High pressure | 150PSI |
Battery capacity | 4000 mAh |
Charging port | Micro-USB |
Size | 120x78x50mm |
Unit | KPA, BAR, PSI, KG/cm |
Accessories | charging cable, trachea, ball inflation needle |
Suitable for | cars, bicycles, balls, swimming rings, etc. |
Function | inflatable, lighting, with USB reverse charging |
Instructions for Use1:
1. Insert the pin of one end of the charger into the car USB in advance, and insert the other end of the USB plug into the USB socket on the top of the pump to charge the air pump. The normal charging time is 4 hours after the first charge and until each charge is fully charged.
2. Turn on the power button, the LCD screen starts to display, press the switch button to switch between the four air pressure units of PSI, BAR, KAP, KG/CM², select the unit you want, and press the plus or minus button to set what you need. The value of the air pressure, after the flashing stops, press the power button to start the inflation, the bottom LED lights when inflating, and the LED lights will automatically turn off after the automatic charging stops.
3. Short press the light button to switch between motorcycles, cars, and balls.
Display motorcycle mode default 28PSI
Display car mode default 36PSI
Display ball mode default 8 PSI
4. After setting the profile mode, short press - or + to adjust the preset pressure value, long press - or + to quickly adjust the preset pressure value.
5. Press the power button to start inflation. When the inflation pressure reaches the pressure value you set, the smart inflator will automatically stop the inflation work immediately, but the LED light is still on, and then press the power switch to turn it off.
6. When the inflation is completed, unscrew the air tube to complete the inflation, and be careful to connect the tire inflation connector to see if it is hot; it is normal that there will be a small amount of air leakage when the connector is unscrewed.
7. If it is judged that the tire pressure is too high, you can use the tire inflation connector to screw on the appropriate position on the valve core to deflate and reduce pressure.
8. Unscrew the tire inflation connector from the main engine, insert it into the storage slot at the bottom of the cylinder, put the cylinder away, and place it in a dry, ventilated and safe place.
Instructions for Use2:
1. Long press the power buton to tum on Lang press for three sconds to turn on.
2. Press the switch key to select the unit press +or-to adjust the air pressure value.
3. Press the power button to start inilation. Start after the number blinking stops.
Note:
Subject to the actual product. there is a little error in manual measurement.
Package Included:
1 X | M8 Air Pump Host |
1 X | Inflatable Tube |
3 X | Inflatable Accessory Connector |
1 X | USB Charging Cable |