Package Included:
1x Car License Plate Light
Length: 20cm/7.8inch
Working voltage: 12V
Power: 24W
Color Temperature: 1200lm
Life: 100000 (hours)
Current: 0.25 (A)
Usage: License Plate Light Lamp
Other Usage: Reverse Backup Light Lamp DRL
Fitment: Car, Pickup, Truck, SUV, Trailer, RV
Features:
- Long lasting life.
- You can adjust (tilt) the angle to function as License Plate Light or Backup Reverse Light.
- Brand new imported silicone lamp beads with 24 lights.
- IP68 waterproof design can easily cope with various extreme environments.
- It can be directly bolted on any Cars, Trucks, SUVs, Trailers, RV’s
Wiring instructions:
Black wire: input negative-
Red wire: input positive+
Green line: connect to ACC driving mode to brighten illusion light
Gray line: Connected to the brake light, the brake red light flashes 3 times and then it stays on
Orange line: Streamer mode when connecting the left turn signal
Orange line: Streamer mode when connecting the left turn signal
The black wire is grounded, the red wire is connected to ACC, the green wire is connected to ACC, the blue wire is connected to the positive pole of the reverse car, the left and right turn yellow wire is connected to the left and right turning positive pole, and the white wire is connected to the brake positive pole.
1: Green line driving phantom color mode automatically changes.
2: Blue line reversing pure white light is highlighted.
3: White line brake red flashes three times and then keeps on.
4: The yellow line is divided into left and right sides. When turning to the left, the yellow light flows to the left, and when turning to the right, the yellow light flows to the right.
5: When double flashing, the yellow light in the middle section is always bright, flowing to the left and right sides.
Note:
Please try to reverse the polarity of the LED light wire if you found that the LED light is not working properly after installation
12V LED License Number Plate Light Car Van Reverse Trailer Backup Lamp Universal
COD
Buy Now